Contact Us

Use the form on the right to contact us.

821 Allen Street
Dallas, TX, 75204
United States

We import 25+ year old Japanese vehicles into the USA. 

FB_IMG_1444503115198.jpg

Blog

Event Coverage | How-to Articles | News

 

 

We are always looking for writers. Want to contribute? Send us an email - admin@rbmotoring.com

Filtering by Tag: r32 clutch slave

Nissan Skyline R32 - Clutch Master Cylinder and Clutch Slave Cylinder USDM Compatibility

RB Motoring

Nissan Skyline R32 - Clutch Master and Clutch Slave Compatibility

Wondering what Clutch Master Cylinder and Clutch Slave Cylinder are cross compatible with USDM parts for your Nissan Skyline R32 GTR or GTS-T? Look no further.


Nissan Skyline R32 GTS-T Clutch Slave

The clutch slave for the GTS-T is identical to the clutch slave in the 240SX S13. You can purchase them on Amazon here or on eBay here. There are multiple interchangeable part numbers, but if you plan to go to a parts store, just be sure to use a year of S13, not S14. 1992 works.

Nissan Skyline R32 GTR Clutch Slave

Unfortunately the Nissan Skyline R32 GTR doesn’t have a direct interchange USDM compatible clutch slave cylinder. However, the early R32 GTR are the same as the R33 RB25DET clutch slave cylinder, which has a somewhat plentiful aftermarket offering here in the USA. You can buy one on Amazon here, or here, and eBay here.

Be sure to look at your slave cylinder on your transmission to see which one you have. The early transmission is an L shaped cylinder, while the later pull-type transmission of the R32 GTR has a completely straight slave cylinder.

Nissan Skyline R32 GTST Clutch Master Cylinder

The R32 GTST do not have a direct plug-and-play clutch master cylinder in the USA. There is one viable option if you aren’t against bending a hardline, however.

The S13 240SX clutch master cylinder will fit the Nissan Skyline R32 GTST if you bend the clutch hardline that goes into the cylinder. It’s not a drastic change, and there is room for the bend to not kink if done properly, but do so at your own risk. The line in the Skyline cylinder goes into the top of the cylinder, whereas the 240SX S13 goes into the side.

If you want to buy the cylinder, you can purchase it on Amazon here, or eBay here.

If you don’t want to bend the hardline, you might be able to get lucky on eBay finding a used clutch master. New ones are $100~ as of writing this post, but I have seen used ones pop up as low as $30 on eBay.

Nissan Skyline R32 GTR Clutch Master Cylinder

The R32 GTR doesn’t have a USDM Compatible Clutch Master Cylinder. Your only option is to find a used one or aftermarket replacement, which you can find on eBay here for about $100.

If you are looking for other compatible parts, consider bookmarking our master list of USDM compatible parts for the GTR and GTST. Links below!

Nissan Skyline R32 GTR Compatible USDM Parts List

Nissan Skyline R32 GTST Compatible USDM Parts List